|
|
|
|
  ProductHydraulic Cylinder |
|
|
 |
| |
|
70kgf/㎠ |
140kgf/㎠ |
Inside Cylinder Diameter(mm) |
Φ40,Φ50,Φ63,Φ80,Φ100,Φ125,Φ140,Φ150,Φ160,Φ180,Φ200,Φ250 |
Maximum Working Pressure |
70kgf/㎠(6,864MPa) |
140kgf/㎠(13,729MPa) |
Inner Pressure |
105kgf/㎠(10,297MPa) |
210kgf/㎠(20,594MPa) |
|
3~8kgf/㎠ |
|
10~300mm/sec(Excluding cushion area) |
Range of working temperature |
-10~+80℃(use VITON above 100℃) |
Applied working oil |
regular mineral oil |
Rod End Thread Tolerance |
Grade KSB0214 |
|
| |
100mm이하 |
+1.6 |
101~250 |
+2.5 |
251~630 |
+4.0 |
0 |
0 |
0 |
| |
631~1000이하 |
+5.0 |
1001~1600 |
+6.3 |
1600초과 |
+8.0 |
0 |
0 |
0 |
|
Paint |
Tube:2.5G 6/2 Cover and Letters: Black |
Supporting or Fixing on Surface Type |
SD,LA,LB,FA,FB,FC,FD,TA,TC,CA,CB |
SD,LA,LB,FA,FB,FC,FD,TA,TC |
|
Regular: Nylon Tarpaulin, Special: Neoplan (for heat-resist) |
Single (1 Ring), Double (Y Ring) |
Lock Nut |
Note) 1. Since LB of the supporting and fixing on surface type is 70, for use over 70, please contact us.
2. For uses in high temperature, high Speed, and prolonged period, please contact us. |
Inside Diameter |
Φ40~Φ63 |
Φ80~Φ160 |
Φ180~Φ200 |
Φ250 |
Cushion Length
|
20 |
25 |
30 |
35 |
Inside Diameter |
Φ40~Φ50 |
Φ63~Φ80 |
Φ100 |
Φ125~Φ250 |
Limit of Stroke
|
1200 |
1600 |
2000 |
2000 |
Inside Diameter |
Φ40~Φ50 |
|
Note) 1. Please consider buckling according to supporting or fixing on surface type separately.
2. For longer stroke than the limit, please contact us. |
Limit of Stroke
|
1200 |
 |
|
| Note) |
The standard for piping (PT) and cushion positions is as of PT: A and Cushion: B. If any modification is to be made, refer to the above picture |
|
|
|
NBR |
URETHANE |
VITON
|
Regular Mineral Working Oil
|
|
|
|
Water-soluble Glycogel |
|
|
|
W/O Working Oil |
|
|
|
O/W Working Oil |
|
|
|
Phosphate Acid Ester |
|
|
|
Fatty Acid Ester |
|
|
|
Note) 1.  , is usable, while  is not usable
2. For other working oils beside the regular one, please contact us |
| |
|
|
|
