|
|
|
 Product Hydraulic Cylinder |
|
|
 |
|
Type |
70kgf/§² |
140kgf/§² |
Inside Cylinder Diameter(mm) |
¥Õ40,¥Õ50,¥Õ63,¥Õ80,¥Õ100,¥Õ125,¥Õ140,¥Õ150,¥Õ160,¥Õ180,¥Õ200,¥Õ224,¥Õ250 |
Maximum Working Pressure |
70kgf/§²(6,864MPa) |
140kgf/§²(13,729MPa) |
Inner Pressure |
105kgf/§²(16.67MPa) |
210kgf/§²(27,459MPa) |
Minimum working pressure |
3~8kgf/§² |
Range of working speed |
500mm/sec |
lowest working speed |
10mm/sec(¥Õ40~¥Õ140) |
20mm/sec(¥Õ160~¥Õ250) |
Range of working temperature |
-10~+80¡É |
Applied working oil |
regular mineral oil |
Rod End Thread Tolerance |
Grade KSB0214 |
Stroke Tolerance |
|
|
100mmÀÌÇÏ |
+0.6 |
101~250 |
+2.5 |
251~630 |
+4.0 |
0 |
0 |
0 |
|
631~1000mmÀÌÇÏ |
+5.0 |
1001~1600 |
+6.3 |
1600ÃÊ°ú |
+8.0 |
0 |
0 |
0 |
|
Paint |
Tube:2.5G 6/2 Cover and Letters: Black |
Supporting or Fixing on Surface Type |
Standard Type |
SD Type,LA Type,FA Type,FB Type,TC Type,CA Type |
Other
Parts |
include dust screen |
Regular: Nylon Tarpaulin, Special: Neoplan (for heat-resist) |
rod end connecting eye |
Single (1 Ring), Double (Y Ring) |
±×¿Ü |
Lock Nut |
Note)
|
1. The Highest Working Pressure is the Maximum pressure for sustained using.
2. The lowest working speed does not consider the cushion portion. |
Inside Diameter |
¥Õ40~¥Õ63 |
¥Õ80~¥Õ160 |
¥Õ180~¥Õ224 |
¥Õ250 |
Cushion Length
|
20 |
25 |
30 |
35 |
Note) |
Cushions cannot be installed in followings
1. Rod Type A: Rod Side of ¥Õ40,¥Õ50,¥Õ63
2. Rod Type B: Rod Side of ¥Õ40 |
|
Other supporting and fixing surface type beside TC type. |
Inside Diameter |
¥Õ40~¥Õ63 |
¥Õ80~¥Õ160 |
¥Õ180~¥Õ250 |
Limit of Stroke
|
0~2000 |
51~2000 |
101~2000 |
Inside Diameter |
¥Õ40~¥Õ80 |
¥Õ100~¥Õ125 |
¥Õ140~¥Õ200 |
¥Õ125~¥Õ250 |
Limit of Stroke
|
101~2000 |
151~2000 |
201~2000 |
251~2000 |
Note) |
Strokes other than described above will be custom-built. (Please, contact us.) |
1.The material of standard packing is URETHANEor NBR.
2.The positions of piping, cushion valve, air ventilation are seen from the rod side. |
|
 |
|
Note) |
The standard for piping (PT) and cushion positions is as of PT: A and Air Ventilation: B. If any modification is to be made, refer to the above picture. |
|
There is no cushion in followings.
* Rod A Type: Rod side of ¥Õ40,¥Õ50,¥Õ63
*Rod B Type: Rod side of ¥Õ40 |
|
|
|
4. Symbols for Rod End Thread Types and Piping Types |
|
A) Rod end thread type |
 |
* Type 2 have longer end thread than that of Type 1 and lock nut is installed.
* The 1 type will be made unless other directions are not made |
|
B) Piping Types |
 |
*The X type will be made unless other directions are not made. |
|
|
Packing Material |
NBR |
URETHANE |
ºÒ¼Ò(VITON)
|
Regular Mineral Working Oil
|
|
|
|
Water-soluble Glycogel |
|
|
|
W/O Working Oil |
|
|
|
O/W Working Oil |
|
|
|
Phosphate Acid Ester |
|
|
|
Fatty Acid Ester |
|
|
|
|
|